Manual Catheter Hole Driller - Accu-Drill MD

The Accu-Drill MD10 Manual Hole Driller is capable of drilling and skiving precise holes in plastic, silicone and steel braided medical tubing. It is intended for use in Interface environments and low volume manufacturing. It may also be configured to punch holes. The Accu-Drill MD10 is a one axis (Z-axis) machine with a motorized drill, and can be configured with up to three axes.

Key Features

  • Hollow spindle allows for the use of an ejector pin to remove plugs from drills

  • Automatic hole plug ejection keeps drills clean for precise hole drilling

  • Catheter drilling guides change easily and accurately for easy set-up

  • Keyless drill chuck allows for fast and easy drill changes

  • Drill depth setting to within .001”

Commonly Used Materials

  • Teflon® PTFE
  • Teflon® FAP
  • Silicone
  • Polyimide
  • Pebax®
  • PEEK
  • Polyurethane
  • PVC (vinyl)
  • TPE
  • PET
  • Polycarbonate
  • Acrylic
  • Polyethylene
  • Latex andnatural rubber
  • Nylon 6 and small diameter nylon 12

    • Commonly Used Materials

    • Spindle speed: 0 – 4,000rpm
    • Drill depth setting resolution: .001” (.025mm)
    • Drill chuck runout: .0002” (.005mm) TIR
    • Drill chuck: .125” (3.17mm) diameter
    • Power: 110 VAC at 50/60Hz
    • Air: 30-120psi
    • Dimensions: 12” x 10” x 16″
    Request A Quote
    Download Brochure